Kia Soul: Occupant Detection System (ODS). Installation - SRSCM - RestraintKia Soul: Occupant Detection System (ODS). Installation

Kia Soul 2014-2019 PS Service Manual / Restraint / SRSCM / Occupant Detection System (ODS). Installation

1.
Install in the reverse order of removal.
2.
Reconnect the battery negative cable.
3.
After installing the ODS, confirm proper system operation :
A.
Turn the ignition switch ON the SRS indicator should be turned on for about six seconds and then go off.
B.
Telltale lamp will turn on for 4 seconds and be turned off for 3 seconds. After the 7 seconds, it shall remain off if the ODS does not require suppression and the passenger airbag is enabled.
    Occupant Detection System (ODS). Removal
    1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front passenger seat as ...

    Schematic Diagrams
    Circuit Diagram (1) Circuit Diagram (2) Circuit Diagram (3) SRSCM Connector Terminal Harness Connector Pin No. Function(connector A) Pin No. ...

    See also:

    Installtion
    1. With a putt knife, scrape the old adhesive smooth to a thickness of about 2mm (0.08 in.) on the bonding surface around the entire quarter fixed glass flange. ...

    Air Ventilation Seat Control Unit Description
    The ventilated seat system uses a Push method to cool the seat. A blower mounted in the seat generates the cool air, which then travels through ducts to the seat back and cushion. ...

    Torque Converter Control Solenoid Valve (T/CON_VFS). Removal
    1. Remove the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover") 2. Remove the drain plug (A) and dr ...