Kia Soul: Line Pressure Control Solenoid Valve. Inspection - Automatic Transaxle Control System - Automatic Transaxle SystemKia Soul: Line Pressure Control Solenoid Valve. Inspection

Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Line Pressure Control Solenoid Valve. Inspection

1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector (A).

3.
Measure resistance between solenoid valve signal terminal and ground terminal.
4.
Check that the resistance is within the specification.
    Line Pressure Control Solenoid Valve. Removal
       Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

    See also:

    Changing Priority
    What is Priority? It is possible to pair up to five BluetoothВ® Wireless Technology devices with the car audio system. The "Change Priority" feature is used to set the connection priorit ...

    Wheel alignment and tire balance
    The wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. In most cases, you will not need to have your wheels al ...

    High mounted stop light replacement
    1. Open the tailgate. 2. Remove the cover. 3. Disconnect the connector by pressing the clip (1). Bulb type 4. Pull out the module from the high mounted stop light assembly by pulling both ...