Kia Soul: Installation
When installing, O-rings of clutch tube should be replaced with
a new one.
|
| 1. |
Install in the reverse order of removal.
|
| 2. |
After be equipped, perform bleeding air procedure after pouring
the brake fluid.
(Refer to Clutch System - "Clutch release cylinder")
|
Removal
1.
Remove the air cleaner assembly.
G 1.6 GDI (Refer to Engine Mechanical System - "Air Cleaner")
G 2.0 GDI (Refer to Engine Mechanical System - " ...
See also:
Operation in foreign countries
If you are going to drive your vehicle in another country, be sure to:
Observe all regulations regarding registration and insurance.
Determine that acceptable fuel is available.
...
Key operations
Type A
Type B
Used to start the engine.
Used to lock and unlock the doors.
Type B
To unfold the key, press the release button then the key will unfold automatically.
To fold the key, f ...
Checking the tire inflation pressure
1.After driving approximately 4 ~6miles(7~10km or about 10min), stop at a safety
location.
2.Connect connection hose (9) of the compressor directly to the tire valve.
3.Plug the compressor power c ...