Kia Soul: Installation - Clutch Switch - Clutch System - Kia Soul 2014-2019 PS Service ManualKia Soul: Installation

Second generation PS (2014-2019) / Kia Soul 2014-2019 PS Service Manual / Clutch System / Clutch Switch / Installation

1.
Install in the reverse order of removal.
(1)
Tighten the nut with the specified torque.
Tightening torque:
2.0 ~ 4.0 N.m (0.2 ~ 0.4 kgf.m, 1.4 ~ 2.9 lb-ft)
  
After pressing the clutch pedal operation stroke to the position (D), turn the clutch switch lever to ON->OFF position (E) and then tighten the bolts (B) with specified torque.
Clutch pedal operation stroke (D)
Gasoline 1.6: 145 ± 3 mm(5.7087 ± 0.1181 in.)
Gasoline 2.0: 150 ± 3 mm(5.9055 ± 0.1181 in.)
Ignition lock switch ON->OFF position (E)
Gasoline 1.6: 72.5 ± 3 mm(2.8543 ± 0.1181 in.)
Gasoline 2.0: 75.0 ± 3 mm(2.9528 ± 0.1181 in.)

    Removal
    1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the clutch switch connector (A). ...

    Clutch Pedal
    ...

    See also:

    Cylinder Head Inspection
    Cylinder Head 1. Inspect for flatness. Using a precision straight edge and filler gauge, measure the surface the contacting the cylinder block and the ...

    Checking the engine oil level
    Engine 1.6 Engine 2.0 1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (abou ...

    Adjustment
    Inspect Glass Alignment 1. Inspect the alignment of the movable glass (C) that is between the front (A) and rear (B) glass and if needed adjust it. ...