Kia Soul: Input Speed Sensor. Inspection - Automatic Transaxle Control System - Automatic Transaxle System - Kia Soul 2014-2018 PS Service ManualKia Soul: Input Speed Sensor. Inspection

Second generation PS (2014-2018) / Kia Soul 2014-2018 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Input Speed Sensor. Inspection

1.
Check signal waveform of Input & output speed sensor using the GDS.

Specification: Refer to "Signal Wave Form" section.

    Input Speed Sensor. Signal Waveform
    Fig 1) Input/Output speed sensor at low speed Fig 2) Input/Output speed sensor at high speed ...

    Input Speed Sensor. Removal
    1. Remove the valve body assembly. (Refer to Hydraulic System - "Valve Body") 2. Disconnect the input & output speed senso ...

    See also:

    Warnings and indicators
    All warning lights are checked by turning the ignition switch ON (do not start the engine). Any light that does not illuminate should be checked by an authorized Kia dealer. After starting the en ...

    Canister Close Valve (CCV). Description and Operation
    Description Canister Close Valve (CCV) is normally open and is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmo ...

    Brake Switch. Installation
    1. Fix the brake pedal arm and insert fully the brake switch as hiding contact part. 2. After inserting, turn the brake switch 45° ...