Kia Soul: Inhibitor Switch. Specifications
Second generation PS (2014-2018) / Kia Soul 2014-2018 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Inhibitor Switch. Specifications
▷ Type: Combination of output signals from 4 terminals
| Power supply (V) |
12 |
| Output type |
Combination of output signals |
Signal Code Table
| |
P |
P-R |
R |
R-N |
N |
N-D |
D |
| S1 |
12V |
12V |
0 |
0 |
0 |
0 |
0 |
| S2 |
0 |
12V |
12V |
12V |
0 |
0 |
0 |
| S3 |
0 |
0 |
0 |
12V |
12V |
12V |
0 |
| S4 |
0 |
0 |
0 |
0 |
0 |
12V |
12V |
Inhibitor Switch. Description
Inhibitor Switch monitors the lever's position(P, R, N, D) and is used
to control gear setting signals.
...
See also:
Explanation of scheduled maintenance items
Engine oil and filter
The engine oil and filter should be changed at the intervals specified in the
maintenance schedule. If the vehicle is being driven in severe conditions, more
frequent oil an ...
ETC (Electronic Throttle Control) System. Repair procedures
Inspection
Throttle Position Sensor (TPS)
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output v ...
Tire replacement
If the tire is worn evenly, a tread wear indicator will appear as a solid band
across the tread. This shows there is less than 1/16 inch (1.6 mm) of tread left
on the tire. Replace the tire when ...