Kia Soul: Immobilizer Control Unit Removal
Second generation PS (2014-2019) / Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Immobilizer System / Immobilizer Control Unit Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the main crash pad assembly.
(Refer to Body - " Main Crash Pad Assembly")
|
| 3. |
Disconnect the connector of the immobilizer unit and then
remove the immobilizer unit (A) after loosening a nut.
|
Replacement
Problems And Replacement Parts:
Problem
Part set
GDS required?
All keys have been lost
Blank key (4)
YES
Antenna co ...
Immobilizer Control Unit Installation
1.
Install the immobilizer control unit after connecting the
unit connector.
2.
Install the main crash pad assembly.
...
See also:
Jump starting
Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm
to yourself or damage to your vehicle or battery, follow these jump starting procedures.
If in doubt, we strongly recom ...
Battery recharging
WARNING - Risk of electrocution
Never touch the electrical ignition system while the vehicle is running. This
system works with high voltage which can "zap" you.
Your vehicle has a maint ...
License plate light bulb replacement
1. Remove the lens by pressing the tabs.
2. Remove the socket from the lens.
3. Remove the bulb by turning it counter clockwise.
4. Install a new bulb in the socket and install the socket to th ...