Kia Soul: If you have a flat tire while driving - Emergency while driving - What to do in an emergencyKia Soul: If you have a flat tire while driving

Kia Soul 2014-2019 PS Owner's Manual / What to do in an emergency / Emergency while driving / If you have a flat tire while driving

If a tire goes flat while you are driving:

1.Take your foot off the accelerator pedal and let the vehicle slow down while driving straight ahead.

Do not apply the brakes immediately or attempt to pull off the road as this may cause a loss of control.

When the vehicle has slowed to such a speed that it is safe to do so, brake carefully and pull off the road. Drive off the road as far as possible and park on a firm level ground. If you are on a divided highway, do not park in the median area between the two traffic lanes.

2.When the vehicle is stopped, turn on your emergency hazard flashers, set the parking brake and put the transaxle in P (Park, automatic transaxle) or reverse (manual transaxle).

3.Have all passengers get out of the vehicle. Be sure they all get out on the side of the vehicle that is away from traffic.

4.When changing a flat tire, follow the instruction provided later in this section.

    If the engine stalls at a crossroad or crossing
    If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place. ...

    If the engine stalls while driving
    1.Reduce your speed gradually, keeping a straight line. Move cautiously off the road to a safe place. 2.Turn on your emergency flashers. 3.Try to start the engine again. If your vehicle will not s ...

    See also:

    Pre-charge Relay Specifications
    Specification ItemSpecificationONRated Voltage(V)450Rated Ampere(A)10Voltage Drop(V)Less than 0.5 (10A)CoilOperation Voltage(V)12Resistance(?)104.4 ~ 127.6 (20°C) ItemSpecificationRemarkM ...

    Battery Sensor Description
    Vehicles have many control units that use more electricity. These units control their own system based on information from diverse sensors. It is important to have a stable power supply as th ...

    Seat height (for driver’s seat)
    To change the height of the seat, push the lever upwards or downwards. To lower the seat cushion, push down the lever several times. To raise the seat cushion, pull up the lever several times. ...