Kia Soul: Hood Lift Repair procedures - Hood - Body (Interior and Exterior)Kia Soul: Hood Lift Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Hood / Hood Lift Repair procedures

Replacement
   
When removing and installing the hood lifter, work in a group of two or more.
When removing the clips, use a clip remover.
1.
Using a screwdriver (A), lift the socket clips (B) up slightly on both ends of the lifter (D), and then remove the lifter from the bracket (C).

2.
Push the socket of the lifter into the bracket for installation.
   
Make sure that the hood locks/unlocks and opens/closes properly.
    Hood Assembly Repair procedures
    Replacement     • Be careful not to damage the hood and body.     • When removing and installing the hood, work in a group o ...

    Hood Insulator Pad Repair procedures
    Replacement 1. Using a clip remover, detach the clips, and remove the hood insulator pad (A).     • Be careful not to scratch the hood panel. 2. Install ...

    See also:

    Checking the tire inflation pressure
    1.After driving approximately 4 ~6miles(7~10km or about 10min), stop at a safety location. 2.Connect connection hose (9) of the compressor directly to the tire valve. 3.Plug the compressor power c ...

    Notes on the safe use of the Tire Mobility Kit
    Park your car at the side of the road so that you can work with the Tire Mobility Kit away from moving traffic. To be sure your vehicle will not move, even when you're on fairly level g ...

    Tire Wear
    1. Measure the tread depth of the tires. Tread depth [limit] : 1.6 mm (0.0630 in.) 2. If the re ...