Kia Soul: Hood Latch Release Handle Replacement - Hood - Body (Interior and Exterior)Kia Soul: Hood Latch Release Handle Replacement

Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle Replacement

1.
Using a screwdriver or remover, remove the hood release handle (A).
  
Use a 6mm hex bit to press the center until the handle easily pulls off the post.

2.
Install in the reverse order of removal.
  
Make sure the hood latch cable is connected properly.
Make sure the hood locks/unlocks and opens/closes properly.
    Hood Latch Release Handle Component Location
    1. Hood latch release handle ...

    Hood Latch Component Location
    1. Hood upper latch assembly 2. Hood lower latch assembly ...

    See also:

    Evaporator Temperature Sensor Description
    The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling ...

    Air bag inflation conditions
    Front air bags Front air bags are designed to inflate in a frontal collision depending on the intensity, speed or angles of impact of the front collision. Side impact and/or curtain air bags ...

    Emergency Fastening Device (EFD). Installation
    1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least thirty seconds. ...