Kia Soul: Hood Assembly Repair procedures - Hood - Body (Interior and Exterior)Kia Soul: Hood Assembly Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Hood / Hood Assembly Repair procedures

Replacement
   
Be careful not to damage the hood and body.
   
When removing and installing the hood, work in a group of two or more.
When removing the clips, use a clip remover.
1.
Using a screwdriver, lift the socket clips (A) up slightly on both ends of the lifter (B).

2.
After loosening the hood hinge (B) mounting bolts, remove the hood assembly (A).

Tightening torque :
21.6~26.5 N.m (2.2~2.7 kgf.m, 15.9~19.5 lb-ft)

3.
Install in the reverse order of removal.
   
Make sure that the hood locks/unlocks and opens/closes properly.
Adjust the hood alignment.
    Hood Assembly Components and Components Location
    Component Location 1. Hood assembly ...

    Hood Lift Repair procedures
    Replacement     • When removing and installing the hood lifter, work in a group of two or more. • When removing the clips, use a clip remover. 1. ...

    See also:

    Pre-tensioner seat belt
    Your vehicle is equipped with driver's and front passenger's pre-tensioner seat belts. The purpose of the pretensioner is to make sure that the seat belts fit tightly against the occupan ...

    Installation
    1. Install the multifunction switch. 2. Install the clock spring. 3. Install the stee ...

    Air Ventilation Seat Control Unit Description
    The ventilated seat system uses a Push method to cool the seat. A blower mounted in the seat generates the cool air, which then travels through ducts to the seat back and cushion. ...