Kia Soul: Heating and air conditioning
1. Start the engine.
2. Set the mode to the desired position. For improving the effectiveness of heating
and cooling;
- Heating: 
- Cooling: 
3. Set the temperature control to the desired position.
4. Set the air intake control to the outside (fresh) air position.
5. Set the fan speed control to the desired speed.
6. If air conditioning is desired, turn the air conditioning system (if equipped) on.
Manual climate control system
1. Fan speed control knob
2. Mode selection button
3. Temperature control knob
4. Air intake control button (fresh/recirculated)
5. Front window defroster button
6. Rear window defroster button ...
Mode selection
The mode selection button controls the direction of the air flow through the
ventilation system.
Air can be directed to the floor, dashboard outlets, or windshield. Five symbols
are used to rep ...
See also:
Pressure Source Unit Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the brake fluid level switch connector (A), and remove the reservoir cap.
...
Shift lock system
For your safety, the Intelligent Variable Transmission (IVT) has a shift lock
system which prevents shifting the transaxle from P (Park) into R (Reverse) unless
the brake pedal is depressed.
To s ...
Glove box
To open the glove box, pull the handle and the glove box will automatically open.
Close the glove box after use.
Always keep the glove box closed while the vehicle is in operation. ...