Kia Soul: Hazard warning flasher - Features of your vehicleKia Soul: Hazard warning flasher

Kia Soul 2009-2013 AM Owner's Manual / Features of your vehicle / Hazard warning flasher

The hazard warning flasher should be used whenever you find it necessary to stop

The hazard warning flasher should be used whenever you find it necessary to stop the vehicle in a hazardous location. When you must make such an emergency stop, always pull off the road as far as possible.

The hazard warning lights are turned on by pushing in the hazard switch. Both turn signal lights will blink. The hazard warning lights will operate even though the key is not in the ignition switch.

To turn the hazard warning lights off, push the switch again.

    Lighting
    ...

    See also:

    Purge Control Solenoid Valve (PCSV). Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between th ...

    Fog Lamps Inspection
    Fog Lamp Switch 1. With the fog lamp switch in each position, make sure that continuity exists between the terminals below. If continuity is not as speci ...

    Inhibitor Switch. Inspection
       • Thoroughly check connectors for looseness, poor connection, bending, corrosion, cont ...