Kia Soul: Hazard Lamp Switch Removal
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the center airvent assembly (A).
|
3. |
Disconnect the connector (A) from the center airvent assembly.
|
4. |
Remove the hazard switch (A) from the center airvent assembly.
|
Hazard Lamp Switch Inspection
1.
The SJB can be diagnosed by using the GDS. The SJB communicates
with the GDS which then displays inputs and outputs along with codes.
It will be able to ...
Hazard Lamp Switch Installation
1.
Install the hazard switch in the center airvent assembly.
2.
Connect the connector and install the center airvent assembly.
...
See also:
Operating door locks from outside the vehicle
Turn the key toward the front of the vehicle to unlock and toward the rear
of the vehicle to lock.
If you lock the driver’s door with a key, all vehicle doors will lock automatically.
Fr ...
Description
Component location : Manual transaxle
case
Operation principle : Back up lamp
switch is pushed by the reverse lug sliding when select arm, and switches the
back up lamp.
Funct ...
Smart Key Diagnostic Repair procedures
Inspection
Self Diagnosis With GDS
Smart key system defects can be quickly diagnosed with the
GDS. GDS quickly operates actuator to monitor input/ouput values and
self diagnose.
The following ...