Kia Soul: Glove Box Housing Repair procedures - Crash Pad - Body (Interior and Exterior)Kia Soul: Glove Box Housing Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Crash Pad / Glove Box Housing Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Using a screwdriver or remover, remove the crash pad side cover [RH] (A).

2.
Loosen the glove box housing mounting bolts (A).

3.
After loosening the mounting screws, remove the crash pad lower panel (A) using a screw driver.

4.
Disconnect the glove box lamp connector (A).

5.
Remove the glove box housing mounting clip (A).

   
When installing glove box housing, be sure to insert lock pin (A) into wiring tape (B).

6.
Install in the reverse order of removal.
   
Make sure that the connectors are connected properly.
Replace any damaged clips.
    Glove Box Housing Components and Components Location
    Component Location 1. Glove box housing ...

    Steering Column Shroud Panel Components and Components Location
    Component Location 1. Steering column shroud lower panel2. Steering column shroud upper panel ...

    See also:

    Piston and Connecting Rod Disassembly
       • Use fender covers to avoid damaging painted surfaces. • ...

    Crash Pad Side Cover Replacement
       • Put on gloves to protect your hands. ...

    Tilting the sunroof
    Before opening or closing the sunroof, open the sunshade (refer to the following page for instructions on how to use the sunshade). To tilt up the sunroof - Push the sunroof glass control leve ...