Removal
1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump")
|
2. |
Disconnect the electric pump wiring connector (A) and the fuel sender connector (B).
|
3. |
Remove the head assembly (A) after releasing the cushion fixing clip (B).
|
4. |
Disconnect the fuel tube connector (A).
|
5. |
Remove the reservior-cup (B) after releasing the fixing hooks (A).
|
6. |
Disconnect the fuel tube quick-connector (A).
|
7. |
Release the fixing hooks, and then remove the pre-filter (B).
|
8. |
Remove the fuel pressure regulator (A).
|
Installation
1. |
Install in the reverse order of removal.
|
Removal
1.
Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump")
...
See also:
Tightening Torques
Item
N.m
kgf.m
lb-ft
Ignition coil mounting bolt
9.8 ~ 11.8
1.0 ~ 1.2
7.2 ~ 8.7
Spark plug
14.7 ~ 24.5
1.5 ~ 2. ...
Alternator Description
The Alternator has eight built-in diodes, each rectifying AC current to
DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage ...
Battery replacement
A transmitter uses a 3 volt lithium battery which will normally last for several
years. When replacement is necessary, use the following procedure.
1. Insert a slim tool into the slot and gently ...