Kia Soul: Front Wheel Guard Repair procedures - Body Side Moulding - Body (Interior and Exterior)Kia Soul: Front Wheel Guard Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Body Side Moulding / Front Wheel Guard Repair procedures

Replacement
   
•
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Remove the front tire.
2.
After loosening the mounting clips and screws, remove the front wheel guard (A).

3.
Install in the reverse order of removal.
   
•
Replace any damaged clips.
    A Pillar Garnish Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

    Rear Wheel Guard Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

    See also:

    Antenna Removal
    1. Disconnect the negative (-) battery terminal. 2. Disconnect the roof antenna connectors (A). 3. Disc ...

    Glove box
    To open the glove box, pull the handle and the glove box will automatically open. Close the glove box after use. Always keep the glove box closed while the vehicle is in operation. ...

    ETC (Electronic Throttle Control) System. Schematic Diagrams
    Circuit Diagram (M/T) (A/T) ...