Kia Soul: Front Stabilizer Link Repair procedures - Front Suspension System - Suspension SystemKia Soul: Front Stabilizer Link Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Suspension System / Front Suspension System / Front Stabilizer Link Repair procedures

Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub.

Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

   
Be careful not to damage to the hub bolts when removing the front wheel and tire (A).
3.
Remove the stabilizer link (A) loosening the nut.

Tightening torque :
98.1 ~ 117.7N.m(10.0 ~ 12.0kgf.m, 72.3~86.8lb-ft)

4.
Install in the reverse order of removal.
    Front Stabilizer Bar Repair procedures
    Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Loosen the bolt (A) and then disconnect the universal joint assembly from the pin ...

    Sub Frame Repair procedures
    Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Loosen the bolt (A) and then disconnect the universal joint assembly from the pin ...

    See also:

    ICM (Integrated Circuit Module) Relay Box Component
    ...

    Rear Disc Brake. Components
    1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Brake pad 6. Pad retainer ...

    Heated Steering wheel. Inspection
    1. Measure a resistance of NTC and Heated pad. A. NTC resistance(Brown / Black) - 10kΩ (9kΩ ~ 11kΩ), 25°C ...