Kia Soul: Front Impact Sensor (FIS). Description
Second generation PS (2014-2019) / Kia Soul 2014-2019 PS Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS). Description
The Front Impact Sensor (FIS) is installed in the Front End Module (FEM).
They are remote sensors that detect acceleration due to a collision at its mounting
location. The primary purpose of the Front Impact Sensor (FIS) is to provide
an indication of a collision. The Front Impact Sensor (FIS) sends acceleration
data to the SRSCM.
SRS Control Module (SRSCM). Variant coding
After replacing the SRSCM with a new one, MUST perform the “Variant Coding”
procedure.
1.
On S ...
See also:
Tie-down hook (for flatbed towing)
CAUTION - Tie-down hooks
Do not use the hooks under the rear of the vehicle for towing purposes. These
hooks are designed ONLY for transport tiedown. If the tie-down hooks are used for
towing, ...
Closing the fuel filler lid
1. To install the cap, turn it clockwise until it “clicks” once. This indicates
that the cap is securely tightened.
2. Close the fuel filler lid and push it in lightly making sure that it is secure ...
Overhead Console Lamp Installation
1.
Install the overhead console lamp after connecting the connector.
2.
Install the lens after tightening 2 screws.
...