Kia Soul: Front Hub / Knuckle Installation - Front Axle Assembly - Driveshaft and axle - Kia Soul 2014-2019 PS Service ManualKia Soul: Front Hub / Knuckle Installation

Second generation PS (2014-2019) / Kia Soul 2014-2019 PS Service Manual / Driveshaft and axle / Front Axle Assembly / Front Hub / Knuckle Installation

1.
Install in the reverse order of removal.
  
Use a SST (09581-11000) when installing the brake caliper assembly.
(Refer to Brake System - "Front Disc Brake")
2.
Check the front alignment.
(Refer to Suspension System - "Front Alignment")
    Front Hub / Knuckle Inspection
    1. Check the hub for cracks and the splines for wear. 2. Check the brake disc for scoring and damage. 3. C ...

    See also:

    Head Lamps Component
    1. Head lamp assembly lens & housing 2. Head lamp low beam bulb 3. Head lamp high beam bulb 4. Turn signal lamp bulb 5. Dust cap (High) 6. Dust cap (L ...

    Seat height (for driver’s seat)
    To change the height of the seat, push the lever upwards or downwards. To lower the seat cushion, push down the lever several times. To raise the seat cushion, pull up the lever several times. ...

    Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Inspection
    1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector (A). 3. Measure resistance bet ...