Kia Soul: Front Door Trim Replacement - Front Door - Body (Interior and Exterior)Kia Soul: Front Door Trim Replacement

Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Front Door / Front Door Trim Replacement

  
•
Put on gloves to protect your hands.
  
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Be careful not to scratch the door trim and other parts.
1.
Using a screwdriver or remover, remove the front door quadrant inner cover (A).
2.
Using a flat-tip screwdriver (A), remove the front door inside handle cap (B) and front door pull cap (C).
3.
After loosening the mounting screws, then remove the front door trim (A) by using a flat-tip screwdriver (B).
4.
Remove the front door inside handle cage (A).
5.
Disconnect the outside rear view mirror switch connector (A) and power window switch connector (B).
6.
Install in the reverse order of removal.
  
•
Make sure the connector is connected properly.
•
Make sure the door locks/unlocks and opens/closes properly.
•
Replace any damaged clips.
    Front Door Trim Component Location
    1. Front door trim ...

    Front Door Inside Handle Replacement
    1. Remove the front door trim. (Refer to Front Door - "Front Door Trim") 2. Loosen the front door inside handle mounting scre ...

    See also:

    Battery Management System (BMS) ECU Specifications
    Specification ItemSpecificationRemarkC-CAN terminating resistance (?)Approx. 60Combined resistance (BMS ECU-Inverter)C-CAN terminating resistnace (?)Approx. 120BMS ECU resistance ...

    Height Adjust Repair procedures
    Replacement 1. Remove the front seat belt upper anchor. (Refer to Front Seat Belt - "Front Seat Belt Pretensioner") 2. After loosening the mounting bolts, remove the height adjust (A). Ti ...

    Interior light bulb replacement
    Map lamp Room lamp Luggage room lamp Glove box lamp Sunvisor lamp 1. Using a flat-blade screwdriver, gently pry the lens from the interior light housing. 2. Remove the bulb by pullin ...