Kia Soul: Front Disc Brake. Installation - Brake System - Brake SystemKia Soul: Front Disc Brake. Installation

Kia Soul 2014-2019 PS Service Manual / Brake System / Brake System / Front Disc Brake. Installation

Brake caliper assembly
1.
Install in the reverse order of removal.
2.
Compress the piston into the caliper body using the SST (09581-11000).

  
Do not hit piston end by hammer or prying directly against piston face with screwdriver to push in piston.
Use wood or a used pad to protect piston end. Pushing an the wood or used pad is recommended.
When spreading a piston, all area of piston end face should be protected from using the SST.
3.
After installation, bleed the brake system. (Refer to Brake system bleeding)
Front Wheel Brake disc
1.
Install in the reverse order of removal.
2.
Compress the piston into the caliper body using the SST (09581-11000).

  
Do not hit piston end by hammer or prying directly against piston face with screwdriver to push in piston.
Use wood or a used pad to protect piston end. Pushing an the wood or used pad is recommended.
When spreading a piston, all area of piston end face should be protected from using the SST.
    Front Disc Brake. Inspection
    Front brake disc thickness check 1. Check the brake pads for wear and fade. 2. Check the brake disc for damage and cracks. ...

    Rear Disc Brake. Components
    1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Brake pad 6. Pad retainer ...

    See also:

    Engine coolant
    The high-pressure cooling system has a reservoir filled with year-round antifreeze coolant. The reservoir is filled at the factory. Check the antifreeze protection and coolant concentration level a ...

    Specifications
    Specifications ItemsSpecificationsRated voltageDC 12VOperating voltageDC 9 ~ 16VOperating temperature-30°C ~ 80°C (-4°F ~ 176°F)Dark currentBCM & Receiver : Max. 4 mABCM : Max. 3 mA ...

    Sub Frame Replacement
    1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Loosen the bolt (A) and then disco ...