Kia Soul: Fog Lamps Removal - Lighting System - Body Electrical System - Kia Soul 2014-2019 PS Service ManualKia Soul: Fog Lamps Removal

Second generation PS (2014-2019) / Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Lighting System / Fog Lamps Removal

Front Fog Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper.
(Refer to Body - "Front Bumper Cover")
3.
Remove the front fog lamp assembly (A) after loosening the mounting screws.

4.
Remove the front fog lamp bulb (A) by turning in the counter clock-wise direction.

    Fog Lamps Inspection
    Fog Lamp Switch 1. With the fog lamp switch in each position, make sure that continuity exists between the terminals below. If continuity is not as speci ...

    Fog Lamps Installation
    1. Install the front fog lamp bulb. 2. Connect the front fog lamp connector. 3. Insta ...

    See also:

    Torque Converter Control Solenoid Valve (T/CON_VFS). Description
    Torque converter control solenoid valve (T/CON) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque converter. ...

    Piston and Connecting Rod Inspection
    Connecting Rod 1. Check the side clearance between piston and connecting rod. Using filler gauge, measure the side clearance while moving the connecting rod bac ...

    Specifications
    Item Specification Master cylinder Type Fixed seal Cylinder I.D. Ø 20.64 mm (0.813 in) Piston stroke 45 ± 1 mm ( ...