•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Take care not to scratch the body surface.
|
|
1. |
Using a screwdriver or remover, remove the fender garnish (A).

|
2. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
•
Put on gloves to protect your hands.
...
•
Put on gloves to protect your hands.
...
See also:
Components and Components Location
Component Location
1. Start Stop Button(SSB)2. FOB key3. Smart key unit4. Interior antenna 15. Interior antenna 26. Bumper antenna7. Door handle & door antenna8. Tailgate open switch
...
Valve Clearance Inspection
Inspect for excessive valve noise and/or engine vibration and adjust if
necessary. ...
Output Speed Sensor. Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification:
Refer to "Signal Wave Form" section.
...