Kia Soul: Fender Garnish Repair procedures - Body Side Moulding - Body (Interior and Exterior)Kia Soul: Fender Garnish Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Body Side Moulding / Fender Garnish Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Using a screwdriver or remover, remove the fender garnish (A).

2.
Install in the reverse order of removal.
   
Replace any damaged clips.
    Roof Side Moulding Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

    A Pillar Garnish Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

    See also:

    Schematic Diagrams
    Circuit Diagram (1) Circuit Diagram (2) Circuit Diagram (3) SRSCM Connector Terminal Harness Connector Pin No. Function(connector A) Pin No. ...

    Front Wiper Motor Installation
    1. Install the wiper motor. 2. Install the crank arm.    ...

    Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Description
    Overdrive clutch control solenoid valve(OD/C) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the overdrive clutch. ...