Kia Soul: Fan speed control
The ignition switch must be in the ON position for fan operation.
The fan speed knob allows you to control the fan speed of the air flow from the ventilation system. To change the fan speed, turn the knob to the right for higher speed, or left for lower speed. To turn the fan speed control off, turn the knob to the “0” position.
Air intake control
The air intake control is used to select the outside (fresh) air position or
recirculated air position.
To change the air intake control position, press the control button.
Recirculated air posi ...
Air conditioning
Press the A/C button to turn the air conditioning system on (indicator light
will illuminate). Press the button again to turn the air conditioning system off. ...
See also:
To increase cruise control set speed
Follow either of these procedures:
Push the button (RES+) and hold it. Your vehicle will accelerate. Release
the button at the speed you want.
Push the button (RES+) and release it immediat ...
Rear Door Latch Repair procedures
Replacement
1.
Remove the rear door module.
(Refer to Rear Door - "Rear Door Module")
2.
Remove the rear door outside handle base (A) by pushing in the lock pins located in the back.
3.
...
Shift Cable. Installation
1.
Install in the reverse order of removal.
•
...