Kia Soul: External Amplifier Components
Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Audio / External Amplifier Components
Connector Pin Information
| No. |
Connector A (12Pin) |
Connector B (22Pin) |
| 1 |
Front door left (+) |
Front center (+) |
| 2 |
Front door right (+) |
- |
| 3 |
Side (Rear) door left (+) |
- |
| 4 |
Side (Rear) door right (+) |
- |
| 5 |
Subwoofer 2 (+) |
Navigation (+) |
| 6 |
Subwoofer 1 (+) |
ACC |
| 7 |
Front door left (-) |
CAN (-) |
| 8 |
Front door right (-) |
CAN (+) |
| 9 |
Side (Rear) door left (-) |
- |
| 10 |
Side (Rear) door right (-) |
B (+) |
| 11 |
Subwoofer 2 (-) |
B (+) |
| 12 |
Subwoofer 1 (-) |
Front center (-) |
| 13 |
- |
|
| 14 |
- |
|
| 15 |
||
| 16 |
Navigation (-) |
|
| 17 |
SPDIF GND |
|
| 18 |
SPDIF (-) |
|
| 19 |
SPDIF (+) |
|
| 20 |
- |
|
| 21 |
GND |
|
| 22 |
GND |
Speakers Installation
Front Speaker
1.
Install the front speaker.
2.
Install the front door trim.
Rear Speaker
1.
Install the ...
External Amplifier Removal
1.
Disconnect the negative (-) battery terminal.
2.
Loosen loosening the mounting nuts.
3.
Remove the a ...
See also:
Headlamp escort
If you turn the ignition switch to the ACC or OFF position with the headlights
ON, the headlights remain on for about 20 minutes. However, if the driver’s door
is opened and closed, the headligh ...
Rail Pressure Sensor (RPS). Description and Operation
Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures
the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor
element) built ...
Antenna Coil Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad ...