Kia Soul: Evaporator Temperature Sensor Replacement
Second generation PS (2014-2019) / Kia Soul 2014-2019 PS Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / Evaporator Temperature Sensor Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove it console side cover (A) by pushing it rearward.
[RH]
|
| 3. |
Disconnect the evaporator temperature sensor connector (A).
|
| 4. |
Remove the evaporator temperature sensor (A) by pulling it out
after rotating it 90° in a counterclockwise direction.
|
| 5. |
Install in the reverse order of removal.
|
Evaporator Temperature Sensor Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector.
3.
Measure resistan ...
In-car Sensor (FATC only)
The In-car air temperature sensor is built in the heater & A/C control
unit.
The sensor contains a thermistor which measures the temperature of the
inside. The signal decided by the r ...
See also:
Starter Cleaning
1.
Do not immerse parts in cleaning solvent.
Immersing the yoke assembly and/or armature will damage the insulation
wipe these parts with a cloth only.
...
Fluid. Components Location
1. Injection hole(eyebolt)
2. Fluid level plug
3. Fluid drain plug
...
Passenger Airbag (PAB) Module. Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable from battery and wait for
at least thirty seconds bef ...