Kia Soul: Evaporator Temperature Sensor Inspection - Air conditioning System - Heating,Ventilation And Air Conditioning - Kia Soul 2014-2018 PS Service ManualKia Soul: Evaporator Temperature Sensor Inspection

Second generation PS (2014-2018) / Kia Soul 2014-2018 PS Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / Evaporator Temperature Sensor Inspection

1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector.
3.
Measure resistance between terminal У+Ф and У-Ф of the evaporator temperature sensor.

Specification
Evaporator core temperature
[∞C (∞F)]
Resistance[KΩ]
Voltage[V]
-10 (14)
43.35
2.93
0 (32)
27.62
2.40
10 (50)
18.04
1.88
20 (68)
12.11
1.44
30 (86)
8.30
1.08
40 (104)
5.81
0.81

4.
Connect the evaporator temperature sensor connector.
5.
Run the engine and turn the A/C switch ON, then measure the voltage between the terminals of the harness connector.
    Evaporator Temperature Sensor Description
    The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling ...

    Evaporator Temperature Sensor Replacement
    1. Disconnect the negative (-) battery terminal. 2. Remove it console side cover (A) by pushing it rearward. [RH] ...

    See also:

    Reset items
    Items should be reset after the battery has been discharged or the battery has been disconnected. Sunroof (See section 4) Climate control system (See section 4) Clock (See section 4, Audio) ...

    Seat warmer (if equipped)
    The seat warmer is provided to warm the front seats during cold weather. With the ignition switch in the ON position, push either of the switches to warm the driver's seat or the front pass ...

    Installation
       When replacing a clutch housing or transaxle assembly, the wiring bracket should be installed in accordance with the clu ...