Kia Soul: ESP OFF Switch Repair procedures - ESP(Electronic Stability Program) System - Brake SystemKia Soul: ESP OFF Switch Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Brake System / ESP(Electronic Stability Program) System / ESP OFF Switch Repair procedures

Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the lower crash pad switch assembly (A) by pushing it.

4.
Disconnect the connectors (A) from the lower crash pad switch assembly.

5.
Check the continuity between the switch terminals as the ESP OFF switch is engaged.

    ESP OFF Switch Description and Operation
    Description 1. The ESP OFF switch is used by users to turn off the ESP system. 2. The ESP OFF lamp is on when ESP OFF switch is engaged. ...

    Steering Angle Sensor Description and Operation
    Description Installed in MDPS (Motor Driven Power Steering), the Steering Angle Sensor (SAS) sends signals to HECU through CAN communication line. The SAS is used to determine turning directio ...

    See also:

    Input Speed Sensor. Inspection
    1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

    Crash Pad Center Panel Component Location
    1. Crash pad center lower panel ...

    Starter Cleaning
    1. Do not immerse parts in cleaning solvent. Immersing the yoke assembly and/or armature will damage the insulation wipe these parts with a cloth only. ...