Kia Soul: Drive Plate Removal and Installation - Cylinder Block - Engine Mechanical System - Kia Soul 2014-2018 PS Service ManualKia Soul: Drive Plate Removal and Installation

Second generation PS (2014-2018) / Kia Soul 2014-2018 PS Service Manual / Engine Mechanical System / Cylinder Block / Drive Plate Removal and Installation

1.
Remove the automatic transaxle .
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the drive plate(A).

Tightening torque :
71.5 ~ 75.5N.m (7.3 ~ 7.7kgf.m, 52.8 ~ 55.6 lb-ft)

3.
Install in the reverse order of removal.
    Drive Plate Components
    1. Adapter plate 2. Drive plate ...

    Flywheel Components
    1. Fly Wheel ...

    See also:

    Components and Components Location
    Components (1) 1. Front bumper cover 2. Front bumper side bracket Components (2) 1. Front bumper lower stiffener 2. Front bumper energy absorber 3 ...

    To increase cruise control set speed
    Follow either of these procedures: Push the RES + switch and hold it. Your vehicle will accelerate. Release the switch at the speed you want. Push the RES+ switch and release it immediately ...

    Line Pressure Control Solenoid Valve. Removal
       Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...