Kia Soul: Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery cable.
When the ignition key is turned to the start position, current flows and
energizes the starter motor's solenoid coil.
The solenoid plunger and clutch shift lever are activated, and the clutch
pinion engages the ring gear.
The contacts close and the starter motor cranks.
In order to prevent damage caused by excessive rotation of the starter
armature when the engine starts, the clutch pinion gear overruns.
Starting System
...
Troubleshooting
•
The battery must be in good condition and fully charged
for this troubleshooting.
...
See also:
In-car Sensor (FATC only)
The In-car air temperature sensor is built in the heater & A/C control
unit.
The sensor contains a thermistor which measures the temperature of the
inside. The signal decided by the r ...
Front Hub / Knuckle Disassembly
1.
Remove the snap ring (A).
2.
Remove the hub assembly from the knuckle assembly.
(1)
Install the ...
Component Location
1. Audio unit
2. Tweeter speaker
3. Roof antenna
4. Front door speaker
5. Rear door speaker
6. Center speaker
7. Antenna cable connector
8. Antenna feeder cable
...