Identify MLA(Mechanical lash adjuster), valves, valve springs
as they are removed so that each item can be reinstalled in its original
position.
|
1. |
Remove the MLAs (A).
When removing MLAs, mark all the MLAs for their rearrangement.
|

|
2. |
Remove the valves.
(1) |
Using the SST (09222 - 3K000, 09222 - 3K100), compress
the valve spring and remove the retainer lock.

|
(2) |
Remove the spring retainer.
|
(3) |
Remove the valve spring.
|
(5) |
Remove the valve stem seal.
|
(6) |
Using a magnetic pickup tool, remove the spring seat.
Do not reuse the valve stem seals.
|
|
|
Engine removal is not required for this procedure.
•
Use fender covers to avoid damaging ...
Cylinder Head
1.
Inspect for flatness.
Using a precision straight edge and filler gauge, measure the
surface the contacting the cylinder block and the ...
See also:
Specification
Ignition System
Ignition Coil
Item
Specification
Primary Coil Resistance (Ω)
0.79 ± 15% [20°C (68°F)]
Secondary Coil Re ...
Forward Collision-Avoidance Assist (FCA) system (Camera type)
FCA system is designed to detect and monitor the vehicle ahead in the roadway
through camera recognition to warn the driver that a collision is imminent, and
if necessary, apply emergency braking. ...
Components and Components Location
Components
1. Front seat belt pretensioner2. Height adjuster3. Rear seat belt retractor4. Rear seat belt buckle [LH]5. Rear seat belt buckle [RH]
...