Kia Soul: Cruise Control Switch Removal - Cruise Control System - Engine Electrical System - Kia Soul 2014-2019 PS Service ManualKia Soul: Cruise Control Switch Removal

Second generation PS (2014-2019) / Kia Soul 2014-2019 PS Service Manual / Engine Electrical System / Cruise Control System / Cruise Control Switch Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver airbag module.
(Refer to the RT group)
3.
Remove the steering wheel.
(Refer to the ST group - "Steering column & shaft")
4.
Loosen the mounting screws from the rear steering wheel cover.

5.
Separate the upper steering wheel remote control switch (A) from the steering wheel.

6.
Remove the upper steering wheel control switch (B) disconnecting the connector (A).

    Cruise Control Switch Inspection
    [Measuring Resistance] 1. Disconnect the cruise control switch connector from the control switch. 2. Measure resistanc ...

    Cruise Control Switch Installation
    1. Install in the reverse order of removal. ...

    See also:

    Transmitter Code Registration (Using GDS)
    1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. ...

    Luggage box (if equipped)
    You can place a first aid kit, a reflector triangle, tools, etc. in the box for easy access. ...

    A/C Pressure Transducer Replacement
    1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery/charging station. 3. ...