Kia Soul: Crash Pad Lower Panel Repair procedures - Crash Pad - Body (Interior and Exterior)Kia Soul: Crash Pad Lower Panel Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Lower Panel Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the cowl side trim.
(Refer to Interior Trim - "Cowl Side Trim")
2.
Using a screwdriver or remover, remove the crash pad side cover [LH] (A).

3.
After loosening the mounting screws, remove the crash pad lower panel (A) using a screw driver.

4.
Disconnect the diagnosis connector (A).

5.
Install in the reverse order of removal.
   
Make sure that the connectors are connected properly.
Replace any damaged clips.
    Crash Pad Lower Panel Components and Components Location
    Component Location 1. Crash pad lower panel ...

    Glove Box Housing Components and Components Location
    Component Location 1. Glove box housing ...

    See also:

    Crash Pad Center Panel Replacement
       • Put on gloves to protect your hands. ...

    Description
    The ECM (Electro Chromatic inside rear view Mirror) is intended dim the reflecting light in the rear view mirror. The forward facing sensor detects brightness of the surroundings, while th ...

    Fuel filter (cartridge)
    A clogged filter can limit the speed at which the vehicle may be driven, damage the emission system and cause multiple issues such as hard starting. If an excessive amount of foreign matter accumu ...