Kia Soul: Crash Pad Center Panel Repair procedures - Crash Pad - Body (Interior and Exterior)Kia Soul: Crash Pad Center Panel Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Center Panel Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the floor console assembly.
(Refer to Floor Console - "Floor Console Assembly")
2.
Remove the crash pad lower panel.
(Refer to Crash Pad - "Crash Pad Lower Panel")
3.
Remove the glove box housing.
(Refer to Crash Pad - "Glove Box Housing")
4.
After loosening the mounting screws, remove the crash pad center lower panel (A) using a screw driver.

5.
Install in the reverse order of removal.
   
Make sure that the connectors are connected properly.
Replace any damaged clips.
    Crash Pad Center Panel Components and Components Location
    Component Location 1. Crash pad center lower panel ...

    Main Crash Pad Assembly Components and Components Location
    Component Location 1. Main crash pad assembly ...

    See also:

    Compressor Description
    The compressor is the power unit of the A/C system. It is located on the side of engine block and driven by a V-belt of the engine. The compressor changes low pressure and low temperatur ...

    Climate control air filter Replacement
    1. Open the glove box (A). 2. Remove the air filter panel (A). 3. Remove the filter cover (A) b ...

    Front Door Latch Repair procedures
    Replacement 1. Remove the front door module. (Refer to Front Door - "Front Door Module") 2. Remove the front door outside handle base (A) by pushing in the lock pins located in the back. ...