•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
•
|
Take care not to bend or scratch the trim and panels.
|
|
1. |
After loosening the mounting screws (A), then remove the console
armrest (B) by using a screw driver.
|
2. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
See also:
Rear Coil Spring Components
1. Spring lower pad
2. Spring
3. Spring upper pad
...
Side Airbag (SAB) Module. Removal
The side airbag cannot be disassembled from the seat back assembly,
so replace assembly when replacing the side airbag.
...
Glove box
To open the glove box, pull the handle and the glove box will automatically open.
Close the glove box after use.
Always keep the glove box closed while the vehicle is in operation. ...