Kia Soul: Cluster Fascia Panel Repair procedures - Crash Pad - Body (Interior and Exterior)Kia Soul: Cluster Fascia Panel Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Crash Pad / Cluster Fascia Panel Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Lower the steering wheel.
2.
Using a screwdriver or remover, remove the cluster fascia panel (A).

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
    Cluster Fascia Panel Components and Components Location
    Component Location 1. Cluster fascia panel ...

    Center Fascia Panel Components and Components Location
    Component Location 1. Center fascia panel ...

    See also:

    Front Door Module Components and Components Location
    Component Location 1. Front door module ...

    Battery Repair procedures
    Inspection Battery Voltage and Status Check the battery voltage and status using the battery tester. Battery Terminal 1. Move back and forth to check that the battery terminals (A) are loose or ...

    Specifications
    Specifications Front Suspension ItemSpecificationSuspension typeMacPherson StrutShock absorber TypeGasCoil springFree Height [I.D. color]327.9mm (12.9842 in.) [Violet - Yellow] Rear Suspensio ...