Kia Soul: Child-protector rear door lock - Door locks - Features of your vehicleKia Soul: Child-protector rear door lock

Kia Soul 2014-2019 PS Owner's Manual / Features of your vehicle / Door locks / Child-protector rear door lock

 

The child safety lock is provided to help prevent children from accidentally

The child safety lock is provided to help prevent children from accidentally opening the rear doors from inside the vehicle. The rear door safety locks should be used whenever children are in the vehicle.

1. Open the rear door.
2. Push the child safety lock located on the rear edge of the door to the lock ( position. When the child safety lock is in the lock position, the rear door will) position. When the child safety lock is in the lock position, the rear door will not open even when the inner door handle is pulled.
3. Close the rear door.

To open the rear door, pull the outside door handle.

Even though the doors may be unlocked, the rear door will not open by pulling the inner door handle (1) until the rear door child safety lock is unlocked.

WARNING - Rear door locks

If children accidentally open the rear doors while the vehicle is in motion, they could fall out of the vehicle, resulting in severe injury or death. To prevent children from opening the rear doors from the inside, the rear door safety locks should be used whenever children are in the vehicle.

    Speed sensing door lock system (if equipped)
    All doors will be automatically locked after the vehicle speed exceeds 9.3 mph (15 km/h). And all doors will be automatically unlocked when you turn the engine off or when you remove the ignition ...

    Tailgate
    ...

    See also:

    Introduction
    With the Tire Mobility Kit you stay mobile even after experiencing a tire puncture. The system of compressor and sealing compound effectively and comfortably seals most punctures in a passenger c ...

    Removal
    1. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - "Air Cleaner") 2. Remove the battery an ...

    Hazard Lamp Switch Installation
    1. Install the hazard switch in the center airvent assembly. 2. Connect the connector and install the center airvent assembly. ...