Kia Soul: Charge Information Lamp Repair procedures - Lighting System - Body Electrical SystemKia Soul: Charge Information Lamp Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body Electrical System / Lighting System / Charge Information Lamp Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Using the flat screw driver or remover, remove the crash pad center air vent panel (A).

3.
Disconnect the hazard switch connector (A).

4.
Remove center fascia upper panel (A) after loosening the mounting screws.

5.
Disconnect the charge information lamp connector (A).

6.
Remove the charge information lamp assembly (A) after loosening the mounting screws.

Installation
1.
Install the charge information lamp assembly, center fascia upper panel and crash pad center air vent panel.
2.
Connect the negative (-) battery terminal.
    Troubleshooting
    Troubleshooting SymptomPossible causeRemedyOnly one lamp lights on(All exterior lamps)Bulb burned outReplace bulbSocket, wiring or ground faultyRepair if necessaryHead lamps do not light onBulb b ...

    See also:

    How does the air bag system operate
    Air bag are activated (able to inflate if necessary) only when the ignition switch is turned to the ON or START the appropriate position. Air bags inflate in the event of a serious frontal col ...

    Parking Assist Sensor Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front/rear bumper cover. (Refer to Body - "Front Bumper Cover") (Refer to Body - "Rear Bumper Cover") 3. Disconnect ...

    Front Strut Assembly Disassembly
    1. Using the special tool (09546-26000), compress the coil spring (A). Tightening torque: 58.8 ~ 68.6N.m(6.0 ~ 7.0kgf.m, 43.4 ~ 50.6l ...