Kia Soul: Brake Switch. Inspection - Brake System - Brake SystemKia Soul: Brake Switch. Inspection

Kia Soul 2014-2019 PS Service Manual / Brake System / Brake System / Brake Switch. Inspection

1.
Check the stop lamp switch.
(1)
Connect a circuit tester to the connector of stop lamp switch, and check whether or not there is continuity when the plunger of the stop lamp switch is pushed in and when it is released.
(2)
The stop lamp switch is in good condition if there is no continuity when plunger is pushed.
    Brake Switch. Removal
    1. Disconnect the brake switch connector (A). 2. Pull the locking plate (A) as indicated by the arrow. 3. ...

    Brake Switch. Installation
    1. Fix the brake pedal arm and insert fully the brake switch as hiding contact part. 2. After inserting, turn the brake switch 45В° ...

    See also:

    Overhead Console Lamp Inspection
    1. Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. ...

    Components
    1. Front pillar trim 2. Cowl side trim 3. Center pillar lower trim 4. Center pillar upper trim 5. Rear pillar trim 6. Front door scuff trim 7. Rear door scuff trim ...

    Component Location
    1. Head cap 2. Rear wiper arm nut 3. Rear wiper arm & blade 4. Grommet 5. Rear wiper motor assembly 6. Rear wiper motor bolt ...