Kia Soul: Brake Pedal Repair procedures - Chassis - MaintenanceKia Soul: Brake Pedal Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Maintenance / Chassis / Brake Pedal Repair procedures

Inspection
Check that the brake pedal operates smoothly.
Brake Pedal Height and Stop Lamp Switch clearance Adjustment
1.
Disconnect the stop lamp switch connector (A).

2.
Adjust the brake pedal height (A) as illustration below.

Pedal height (A): 174.2 mm (6.86 in)
Full stroke (C): 108 mm (4.25 in)

3.
Adjust the stop lamp switch clearance (B).

Stop lamp clearance (B):
1.0 ~ 2.0 mm (0.04 ~ 0.08 in)

4.
Connect the stop lamp switch connector
    Brake Lines, Hoses and Connections Repair procedures
    Inspection Visually check for proper installation, chafing, cracks, deterioration and any leakage Replace any deteriorated or damaged parts immediately. ...

    Disc Brakes and Pads Repair procedures
    Inspection Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage. Front Brake Front Brake Disc Thickness Check 1. Check the brake pads for wear and fad ...

    See also:

    Battery Inspection
    Battery Terminal 1. Move back and forth to check that the battery terminals (A) are loose or corroded. If the terminals are corroded, clean them. ...

    Description and Operation
    Description BCM CAN Communication Function FunctionDescriptionTimerDefrosterWhen IGN ON, Rear Heater Control FunctionSafety Power WindowAccording to the position of key, Power Window Output C ...

    Inspection
    Inspection     • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failur ...