Kia Soul: Blower Resistor (Manual) Inspection - Blower - Heating,Ventilation And Air ConditioningKia Soul: Blower Resistor (Manual) Inspection

Kia Soul 2014-2019 PS Service Manual / Heating,Ventilation And Air Conditioning / Blower / Blower Resistor (Manual) Inspection

1.
Measure the resistance between the terminals.
2.
The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor)

    Blower Motor Replacement
    [Standard Type] 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash P ...

    Blower Resistor (Manual) Replacement
    1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing. (Refer to Body - "Glove Box Housing") ...

    See also:

    Compressor Installation
    1. Make sure the compressor (A) mounting bolt with the correct length is screwed in. Tighten the mounting bolts with the specified tightening order. ...

    Drive Belt Adjustment
    Drive belt tension measurement and adjustment Belt tension measurement Measure the belt tension using a mechanical tension gauge or a sonic tension meter. Tensi ...

    Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...