Kia Soul: Blind-Spot Collision Warning (BCW) system
Blind-Spot Collision Warning (BCW) system uses a radar sensor to alert the driver while driving.
It senses the rear side territory of the vehicle and provides information to the driver.
- Blind Spot Area
Warning range is dependent on your vehicle speed. However, if the speed of your vehicle is faster by 10km/h or more than other nearby vehicles, the warning is not operated.
- Closing at high speed
When vehicles are approaching to your vehicle at high speed, the warning is operated.
Distance from the approaching vehicle can be seen differently according to the relative speed.
WARNING
- Always check the road condition while driving for unexpected situations even though the BCW (Blind- Spot Collision Warning) system is operating.
- BCW (Blind-Spot Collision Warning) system is a system made for convenience. Do not solely rely on the system but always pay attention to drive safely.
Forward collision-avoidance assist-lane-change oncoming function (if FCA equipped)
Forward Collision-Avoidance Assist- Lane-Change Oncoming function detects the
oncoming vehicle with a front view camera at the front wihdshield. And it assists
the driver’s steering to help avoi ...
BCW (Blind-Spot Collision Warning) (if equipped)
Operating conditions
The indicator on the switch will illuminate when the BCW button is pressed with
the engine start/stop button ON. If the vehicle speed exceeds 30 km/h (18.6 mph),
the system ...
See also:
Mode selection
The mode selection button controls the direction of the air flow through the
ventilation system.
The air flow outlet port is converted as follows:
Refer to the illustration in the “Manual cl ...
Cooling Fan Specifications
Item
Specification
Motor capacity (W)
140 (With A/C)
120 (Without A/C)
Fan type
Puller
Puller
Fan speed control
...
Relay Box (Passenger Compartment) Removal
Passenger Compartment Junction Box (SJB)
1.
Disconnect the negative(-) battery terminal.
2.
Remove the crash pad lower pan ...