Kia Soul: Battery Repair procedures - Power Train - MaintenanceKia Soul: Battery Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Maintenance / Power Train / Battery Repair procedures

Inspection
Battery Voltage and Status
Check the battery voltage and status using the battery tester.
Battery Terminal
1.
Move back and forth to check that the battery terminals (A) are loose or corroded.
If the terminals are corroded, clean them.

   
If battery positive connection is loose, disconnect ground(GND) cable first before attempting to remove or tighten plus connection, to prevent personal injury.
2.
If the battery clamp on battery positive (+) terminal is not seated securely:
(1)
Turn ignition switch OFF and disconnect the battery negative (-) terminal.
(2)
Tighten battery clamp (A) on battery positive (+) terminal

Battery positive (+) terminal:
7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)

3.
If the battery clamp on battery negative (-) terminal is not seated securely:
(1)
Tighten battery clamp (A) on battery negative (-) terminal.

Battery negative (-) terminal:
4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)

Battery Condition
Check the battery for damage or deformation. If severe damage, deformation or leakage is found, replace the battery.
    Cooling System Repair procedures
    Inspection Radiator hoses 1. Check radiator hoses for the following (1) Improper attachment (2) Leaks (3) Cracks (4) Damage (5) Loose connections (6) Chafing (7) Deterio ...

    See also:

    Audio Unit Repair procedures
    Removal     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and ap ...

    System Block Diagram
    Component Parts And Function Outline Component part Function Vehicle-speed sensor Converts vehicle speed to pulse. ECM Receives signals fr ...

    Components Location
    1. Drive shaft 2. Lower arm 3. Front axle 4. Front strut assembly 5. Stabilizer bar 6. Steering gear box 7. Sub frame 8. Front stabilizer link ...