Kia Soul: Battery Installation - Charging System - Engine Electrical System - Kia Soul 2014-2019 PS Service ManualKia Soul: Battery Installation

Second generation PS (2014-2019) / Kia Soul 2014-2019 PS Service Manual / Engine Electrical System / Charging System / Battery Installation

1.
Install in the reverse order of removal.
Battery (-)terminal installation:
4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)
Battery (+)terminal installation:
7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)
Battery mounting bracket mounting bolt:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 Ib-ft)
Battery tray mounting bolts:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 Ib-ft)
  
•
When installing the battery, fix the mounting bracket on the tray correctly.
    Battery Removal
    1. Turn the ignition switch OFF and disconnect the battery negative (-) cable (A). 2. Disconnect the positive (+) terminals (B) from the ba ...

    Battery Vehicle parasitic current inspection
    1. Turn the all electric devices OFF, and then turn the ignition switch OFF. 2. Close all doors except the engine hood, and then lock all d ...

    See also:

    Preset
    Press the key ~ Briefly pressing the key (under 0.8 seconds): Plays the frequency saved in the corresponding key. Pressing and holding the key (over 0.8 seconds): Pressing and hol ...

    Battery Sensor Removal
    1. Disconnect the battery negative (-) cable. 2. Disconnect the battery sensor connector (A). 3. Remove the bat ...

    Audio Unit Components
    Connector Pin Information No. Connector A Connector B 1 Rear left speaker (+) - 2 Front left speaker (+) - ...