Kia Soul: Automatic heating and air conditioning - Automatic climate control system - Features of your vehicleKia Soul: Automatic heating and air conditioning

Kia Soul 2009-2013 AM Owner's Manual / Features of your vehicle / Automatic climate control system / Automatic heating and air conditioning

1. Push the AUTO button. It is indicated by AUTO on the display. The modes, fan

1. Push the AUTO button. It is indicated by AUTO on the display. The modes, fan speeds, air intake and air-conditioning will be controlled automatically by temperature setting.

2.Set the temperature control knob to set the desired temperature.

2.Set the temperature control knob to set the desired temperature.

✽ NOTICE

  • To turn the automatic operation off, select any button or switch of the following:
    - Mode selection button
    - Air conditioning button
    - Front windshield defroster button
    - Air intake control button
    - Fan speed control switch
    The selected function will be controlled manually while other functions operate automatically.
  • Regardless of the temperature setting, when using automatic operation, the air conditioning system can automatically turn on to decrease the humidity inside the vehicle, even if the temperature is set to warm.

Never place anything over the sensor located on the instrument panel to ensure

Never place anything over the sensor located on the instrument panel to ensure better control of the heating and cooling system.

    Automatic climate control system
    Type A 1. Temperature control button 2. AUTO (automatic control) button 3. Air conditioning button 4. Air intake control button 5. A/C display 6. OFF button 7. Front windshield defroster butt ...

    Manual heating and air conditioning
    The heating and cooling system can be controlled manually by pushing buttons other than the AUTO button. In this case, the system works sequentially according to the order of buttons selected. Wh ...

    See also:

    Circuit Diagram
    ...

    Intake Air Temperature Sensor (IATS). Schematic Diagrams
    Circuit Diagram (M/T) (A/T) ...

    Heater Core Replacement
    1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower assembly. (Refer to Heater -"Heater Unit") ...