Kia Soul: Automatic climate control system
To defog inside windshield
1. Set the fan speed to the desired position.
2. Select desired temperature.
3. Press the defrost button (
).
4. The air-conditioning will be turned on according to the detected ambient temperature, outside (fresh) air position and higher fan speed will be selected automatically.
If the air-conditioning, outside (fresh) air position and higher fan speed are not selected automatically, adjust the corresponding button or knob manually.
If the
position is selected, with a low fan speed, a higher fan speed may be automatically
selected.
To defrost outside windshield
1. Set fan speed to the highest position.
2. Set temperature to the Maximum (HI).
3. Press the defrost button (
).
4. The air-conditioning will be turned on according to the detected ambient temperature and outside (fresh) air position will be selected automatically.
If the
position is selected, with a low fan speed, a higher fan speed may be automatically
selected.
Manual climate control system
To defog inside windshield
1. Select any fan speed except “0” position.
2. Select desired temperature.
3. Select the
or
mode.
4. The outside (fresh) air and air conditioning will be ...
Defogging logic
To reduce the possibility of fogging up the inside of the windshield, the air
intake or air conditioning are controlled automatically according to certain conditions
such as
or
position. T ...
See also:
Room Lamp Removal
Room Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Detach the lamp lens (A) from the room lamp with a flat-tip ...
Sealant
Items
Specified sealant
Control shaft assembly
LOCTITE 5060 or Anaerobic adhesives type J (For
flange)
...
ETC (Electronic Throttle Control) System. Repair procedures
Inspection
Throttle Position Sensor (TPS)
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output v ...