Kia Soul: Air Ventilation Seat Control Unit Description and Operation - Seat Electrical - Body Electrical SystemKia Soul: Air Ventilation Seat Control Unit Description and Operation

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body Electrical System / Seat Electrical / Air Ventilation Seat Control Unit Description and Operation

Description
The ventilated seat system generates cool wind by the Push method in the blower mounted under the seat which then travels through ducts to the seat back and cushion.

   
1)
Be careful not to spill drink or water on the seat equipped with ventilation system.
2)
As the blower draws in only small amount of air, it is hard to feel the air strength by touching it.
    Air Ventilation Seat Control Unit Repair procedures
    Removal Cushion Blower 1. Remove the front seat assembly. (Refer to Body - "Front Seat Assembly") 2. Remove the cushion blower (B) after loosening the screws and disconnecting the connector ...

    See also:

    Pre-Charge Registor Description and Operation
    Description Pre-Charge Resistor is installed in the Power Relay Assembly (PRA) and it protects the high voltage circuit by limiting the charging current when the inverter capacitor is being pre ...

    Schematic Diagrams
    Circuit Diagram ...

    Components
    1. Driver Airbag (DAB) 2. Steering Wheel 3. Clock Spring 4. Seat Belt Pretensioner (BPT) 5. Side Impact Sensor (SIS) 6. Side Airbag (SAB) 7. Passenger Airbag (PAB) 8. F ...