Kia Soul: Air intake control - Heating and air conditioning - Manual climate control system - Features of your vehicleKia Soul: Air intake control

Kia Soul (SK3) 2020-2020 Owners Manual / Features of your vehicle / Manual climate control system / Heating and air conditioning / Air intake control

Kia Soul. Air intake control

The air intake control is used to select the outside (fresh) air position or recirculated air position.

To change the air intake control position, press the control button.

Recirculated air position

Kia Soul. Air intake control

With the recirculated air position selected, air from the passenger compartment will be drawn through the heating system and heated or cooled according to the function selected.

Outside (fresh) air position

Kia Soul. Air intake control

With the outside (fresh) air position selected, air enters the vehicle from outside and is heated or cooled according to the function selected.

NOTICE

Prolonged operation of the heater in the recirculated air position (without air conditioning selected) may cause fogging of the windshield and side windows and the air within the passenger compartment may become stale.

In addition, prolonged use of the air conditioning with the recirculated air position selected will result in excessively dry air in the passenger compartment.

WARNING

  • Continue using the climate control system in the recirculated air position may allow humidity to increase inside the vehicle which may fog the glass and obscure visibility.
  • Do not sleep in a vehicle with the air conditioning or heating system on. It may cause serious harm or death due to a drop in the oxygen level and/or body temperature.
  • Continue using the climate control system in the recirculated air position can cause drowsiness or sleepiness, and loss of vehicle control. Set the air intake control to the outside (fresh) air position as much as possible while driving.
    Temperature control, Max A/C selection
    Temperature control The temperature control knob allows you to control the temperature of the air flowing from the ventilation system. To change the air temperature in the passenger compartment ...

    Fan speed control
    The ignition switch must be in the ON position for fan operation. The fan speed control knob allows you to control the fan speed of the air flowing from the ventilation system. To change the fan ...

    See also:

    Front Hub / Knuckle Components and Components Location
    Components 1. Brake disc 2. Wheel hub assembly 3. Hub bolt 4. Dust cover 5. Knuckle 6. Hub bearing 7. Snap ring ...

    Wipers & Washers
    A : Wiper speed control MIST – Single wipe OFF – Off INT – Intermittent wipe LO – Low wiper speed  HI – High wiper speed B : Intermittent wipe time adjustment C :Wash with br ...

    Fuel Tank Pressure Sensor (FTPS). Specifications
    Specification Pressure [kPa (kgf/cm², in H2O) Output Voltage (V) -6.67 (-0.068, -26.8) 0.5 0 2.5 +6.67 (0.068, 26.8) ...